When it comes to Tesla’s sleek and stylish attributes, the Tesla Model 3 takes center stage. But beneath its futuristic exterior lies a critical element that every Tesla Model 3 owner should get familiar with – the jack points.
The Model 3 has a single designated jack point. This is in contrast to the Model S and Model X that have three holes per jack point. Generally tesla model 3 jack points are located near the center of the vehicle’s undercarriage, between the front and rear wheels.
Quick View:
- The specific location of the Model 3’s jack point may vary depending on the year and configuration of the Tesla.
- To lift the Model 3 correctly, you will need a jack pad adapter. Because Tesla vehicles do not come with built-in jack pads like some other car models.
How to Locate the Front and Rear Tesla Model 3 Jack Points?
To locate the front and rear jack points on a Tesla Model 3, follow these steps:
Step 1 – Position the Vehicle:
Park the Model 3 on a level surface and engage the parking brake.
Step 2 – Locate the Jack Points:
The Model 3 has four jack points: two at the front and two at the rear. These jack points are the specific areas where you can safely lift the vehicle using a hydraulic jack or a lift.
Step 3 – Front Jack Points:
The front jack points are located behind the front wheels (approximately 2-3 inches inward from the edge of the vehicle’s underbody). They are marked with a small notch or a circular hole.
Step 4 – Rear Jack Points:
The rear jack points are located in front of the rear wheels (approximately 2-3 inches inward from the edge of the vehicle’s underbody). They are also marked with a small notch or a circular hole
Note: When lifting the Model 3, it is recommended to use a lifting arm pad or a jack pad to protect the vehicle’s battery and chassis. These pads can be placed under the designated jack points to ensure a secure and safe lift.
How Do You Put a Tesla in Jack Mode?
To put a Tesla Model 3 in Jack Mode, follow these steps:
- Park the Model 3 on a level surface and engage the parking brake.
- Ensure the brake pedal is pressed.
- On the vehicle’s touchscreen, tap the “Controls” button located at the bottom of the screen.
- In the Controls menu, select “Service.”
- Within the Service menu, tap “Jack Mode” to activate it. A notification icon will appear, indicating that Jack Mode is active.
- To deactivate Jack Mode, simply touch the “Jack Mode” button again in the Service menu.
Activating Jack Mode is important when lifting the Model 3 to ensure that the vehicle’s self-leveling system is disabled, allowing for safe and proper lifting.
Step-by-Step Guide to Jack Up the Tesla Model 3
To jack up a Tesla Model 3 safely, follow this step-by-step guide:
Step 1
Park the Model 3 on a level surface and engage the parking brake.
Step 2
Locate the jack points. The Model 3 has four jack points, two at the front and two at the rear. These jack points are designated areas where you can safely lift the vehicle using a hydraulic jack or a lift.
This has been discussed in the section above.
Step 3
If using a hydraulic jack, put it under the front or rear jack points. Place it depending on which end of the vehicle you are lifting.
If using a lift, position the lift arms with the lift arm pads under the corresponding front or rear jack points. Now lift the Tesla vehicle.
Step 4
Once the vehicle is lifted to the desired height, place the jack stands under the designated lift points for added safety. Do not rely solely on the hydraulic jack or lift to support the weight of the vehicle.
Step 5
Slowly lower the Model 3 onto the jack stands, ensuring that the vehicle is stable and securely resting on the stands.
Step 6
Repeat the process for the other end.
Related Post: Cruise Control Tesla Model 3: What You Need to Know
Alternative Way of Jacking Up Tesla Model 3
Here’s how you can jack up the Model 3 of Tesla:
Step 1: Jack up the vehicle using one of the rear jack points.
Lift it high enough to be able to place a jack stand and a puck adapter underneath the front jack point on the same side.
The back of the automobile must be lifted in the air when you lower it onto this stand and remove the jack.
Step 2: Remove the one 10 mm bolt holding the left rear plastic spring arm cover.
The finger in the image is pointing to the area of the arm where the jack will be placed.
Then pull the car up with a hockey puck or similar object just enough to fit the second jack stand beneath the nearby rear jack point.
Step 3: Repeat the same procedure on the other side. But this part is tricky as balancing is a big factor. So use help from YouTube or an expert friend.
Step 4: Follow Step 2.
The jack points on the Model 3 are complete junk. They are made of extremely thin aluminum, and the Dual Motor weighs more than 4000 pounds.
The best jack stands ever are a set of Esco 10498 jack stands, along with premium “puck” adapters that fit into the Model 3’s jack points.
Usually, you don’t use pucks. But in this case, they at least partially “lock” the automobile to the jack stand.
Related Post: Unlocking Solutions: Tesla Model 3 Garage Door Opener Without HomeLink
Frequently Asked Questions [FAQs]
How do you jack a Tesla Model 3 without pads?
Use the three-finger method. Place three fingers under the skirt of the vehicle, aligning them with the three holes of the jack point. Remove all fingers except for your middle finger, which will serve as a reference point for the center of the jack point.
Does the Tesla Model 3 come with pucks?
No.
How much do the recommended lift arm pads for a Tesla Model 3 cost?
Prices can range from $20 to $100 or more, depending on the quality and features of the lift arm pads.
What are the recommended lift arm pads to use when jacking up a Tesla Model 3?
For the Model 3, you will need lift arm pads that fit the single-hole design of the jack points.
Related Post: Tesla Model 3 Rim Replacement Cost: Detailed Overview
